CAMECHO 9 Inch Heavy Duty Truck Backup Camera System - 4 Split Screen DVR Monitor, 360° Front/Rear/Left/Right View with 18 IR Night Vision & IP68 Waterproof - Ideal for Semi Trucks, Buses, RVs and Commercial Vehicles Parking Safety

Product Description

AHD front reversing cameras and 9" IPS monitor kit Note: Voltage: DC 12-24V. For safety reasons, the monitor only switches on when it is supplied with power and receives a video signal. When testing, please check that your monitor is supplied with these signals. If you need to use it all the time, please connect the camera to the driving light; if you only need to use the system when reversing, please connect the camera to the reversing light. We recommend using a DC12V power supply unit to power the camera Reversing cameras make parking, driving and reversing safer for everyone Features: 9 inch IPS HD 1080P monitor for a better display Stable signal transmission for stable & real-time image Equipped with 4 HD cameras with IP68 waterproof, IR night vision and 120° wide angle for safe driving Quad channel for front/rear/side view, supports split screen to switch the image to single/2 split images/4 split images Normal and mirrored image for selection, on/off guidelines for selection Loop recording and video playback like a dashcam Support SD card input and save evidence to protect your right (Note: SD card is not included in the package) Kit with a remote control for convenient operation 66ft long extension cable for various large vehicles, such as cars, trucks, RVs, trailers, motorbike, jeeps, vans, SUVs, etc. 9 inch IPS monitor with DVR function IPS HD screen The IPS screen with 178° viewing angle and higher contrast significantly improves the viewing experience in daylight. Split screen/Quad screen The high-resolution monitor allows you to switch back and forth between the cameras. Split screen capability with front, side and rear view cameras, you can switch the image to single/2 split images/3 split images/4 split images. Ensure all-round visibility around your car to reduce blind spots and make driving and reversing safer. Adjustable parking line The parking aid can be switched on or off as required. Stable signal With advanced aviation 4-pin connector, which is characterised by strong interference, firmer connection and easy installation. The fixed cable connection is able to shield the interference of vehicle circuits, which safe and stable signal transmission. Quick and easy to connect Simple plug-and-play, no experience required. Waterproof 720P front/side/rear cameras Effective pixels: 1920*1080 (1080P) Output signal: AHD720P Operating voltage: 12V Operating current: 110MA Format: PAL/NTSC optional Minimum illumination level: 0 LUX LED light range: 5-10 metres Waterproof degree: IP68 Horizontal angle of the lens: 120 degrees Night vision: Black and white 9-inch DVR function IPS monitor specification Voltage: DC12V-24V, Power: 6W Screen: IPS screen, Brightness: 500 Brightness Screen size: 9 inch, screen resolution: 1024*600 Recording: Support TF card (Maximum support 128G) Resolution: 720P/1080P, Round video: 1 min/3 min Signal input interface: four-way AHD720P input Signal format: AHD/720P Remote control: support Line reversal: support on/off Image splitting mode: single image/two images/three images/four images Image mirroring: Front/back/left/right camera, rotate: Up/down Image reversal delay: Can be switched off /3s/6s/9s Timestamp: On/Off, Audio input: None Default setting: Support, Format: Supported Multilingual setting, Time setting Flexible vehicle compatibility The reversing camera parking system is suitable for cars, vehicles, heavy-duty vehicles such as motorhomes, trucks, pickups, campers, buses, trailers, off-road vehicles, vans, harvesters, motorhomes, etc. Less than 65 ft Easy to set up No need to hire an electrician for installation, simply connect the camera and monitor wiring with a 4-pin (32/65ft) avitation cable. Attach the front camera to the bumper, the rear camera to the licence plate with screws, the side camera at any angle you want to monitor. A button on the front of the monitor to switch the system on and off. Tips Please check the voltage of the monitor: 12~24V Please connect 3 wires correctly before switching on the monitor: Please check the wiring: the black wire is connected to the negative terminal, and the red wire is connected to the ignition switch positive (ACC), the green wire is connected to the positive of the reverse light. If you have any problems during installation or with, please find us through us. We will try our best to serve you. If any parts are missing, please send photos to us, our team will handle it as soon as possible.